Jackle JESS WELDING inoMIG 350 Betriebsanleitung Seite 57

inoMIG 350/400/500
1 Identification
The inoMIG 350/400/500 MIG/MAG welding machines were developed for industrial applications.
Their features and functions were therefore designed for professional use.
1.1 Marking
This product fulfils the requirements that apply to the market to which it has been introduced.
A corresponding marking has been affixed to the product, if required.
2 Safety
Please observe the attached "Safety instructions" document.
2.1 Designated use
The device described in these instructions may be used only for the purpose and in the manner described in
these instructions. In doing so, observe the operating, maintenance and servicing conditions.
• Any other use is considered improper.
• Unauthorised modifications or changes to enhance the performance are not permitted.
2.2 Responsibilities of the user
Only the following personnel may work on the device:
• those who are familiar with the basic regulations on occupational safety and accident prevention;
• those who have been instructed on how to handle the device;
• those who have read and understood these operating instructions;
• those who have read and understood the attached "Safety instructions" document;
• those who have been trained accordingly;
• those who are able to recognize possible risks because of their special training, knowledge, and
Keep other people out of the work area.
Please observe the occupational health and safety regulations of the relevant country.
• Observe the regulations on occupational safety and accident prevention. According to
2.3 Personal protective equipment
To prevent danger to the user, these instructions recommend the use of personal protective equipment (PPE).
This consists of protective clothing, safety goggles, a class P3 respiratory mask, protective gloves and
safety shoes.
BA-0014 • 2020-06-05
experience.
DIN EN 60974-10, this device is considered class A welding equipment. Class A welding equipment is
not intended for use in residential areas with a public low-voltage power supply system. Such use can
cause electromagnetic interferences that may result in equipment damage and malfunctions. Only use
the device in industrial areas.
1 Identification
EN - 3