Scope Of Delivery - Jackle JESS WELDING inoMIG 350 Betriebsanleitung

4 Scope of delivery

4 Scope of delivery
• Welding power source
Order the equipment parts and wear parts separately.
The order data and ID numbers for the equipment parts and wear parts can be found in the current product
catalogue. Contact details for advice and orders can be found online at www.jess-welding.com.
4.1 Transport
Although the items delivered are carefully checked and packaged, it is not possible to fully exclude the risk
of transport damage.
Goods-in inspection
In case of complaints
Packaging for returns Where possible, use the original packaging and the original packaging
4.2 Storage
Physical storage conditions in a closed environment:
 See 3.2 Ambient conditions on page EN-8
5 Maintenance and safety inspection
Always disconnect from the mains before all servicing and maintenance work.
The machine is virtually maintenance-free. However, the following maintenance tasks are essential:
NOTICE
For safety reasons, the machine must be subjected to an annual safety inspection by JÄCKLE & ESS
System GmbH or another authorised specialist pursuant to
• DIN IEC 60974 part 4: "Arc welding equipment. Periodic inspection and testing".
EN - 10
Use the delivery note to check that everything has been delivered.
Check the delivery for damage (visual inspection).
If the delivery has been damaged during transportation, contact the last
carrier immediately. Retain the packaging for potential inspection by the
carrier.
material. If you have any questions concerning the packaging and/or how
to secure an item during shipment, please consult your supplier.
DANGER
• Clean the contact tip and gas nozzle regularly to remove weld spatter and dirt. Apply anti-spatter
agent to nozzles after cleaning to reduce spatter adhesion.
• Check the contact tip regularly for wear and damage and replace it in good time.
• Vacuum clean the interior of the machine if necessary, depending on the level of dirt present.
• Operating instructions
inoMIG 350/400/500
• "General safety information"
instruction leaflet
BA-0014 • 2020-06-05