Operation - Jackle JESS WELDING inoMIG 350 Betriebsanleitung

9 Operation

9 Operation
NOTICE
• Only qualified personnel are permitted to perform work on the device or system.
9.1 Control functions
9.1.1 MC1 control system
Fig. 14
A
B
C
D
E
F
Pos.
A
B
C
D
E
F
G
H
I
J
K
L
EN - 20
MC1 control box
Welding voltage display G Select operating mode
Current display H LED indicator for operating mode
LED indicator for material I
strength, water flow J
Select material strength, welding
K
current, water flow
Select JOB, gas test
Wire feed-in, save JOB L
Q
P
O
N
M
L
K
J
I
Description
Display for the welding voltage in volts, flashing dot: HOLD function active, adjustable function
and option values
Display for the welding current in amperes or the material thickness, as well as coolant flow
volume, and other parameters
LED indicator for material thickness in mm or water flow in l/min
Operating button for switching between welding current and material thickness (tap for less than
0.5 seconds) and water flow (press for more than 1 second)
Operating button for retrieving and loading programs (tap for less than 0.5 seconds) or for
activating the gas test (press for more than 1 second)
Operating button for activating the wire feed-in function or for storing programs
Mode operating button for switching between MIG, electrode and TIG operating modes
LED indicator for active operating mode (MIG, electrode or TIG)
LED indicator, HAND/AUTO (MANUAL/AUTOMATIC) mode
Operating button for material selection (tap for less than 0.5 seconds) or select manual (HAND)
or automatic (AUTO) mode (press for more than 1 second)
Knob for setting welding power, all functions, options, material thickness, or other values in the
middle or right-hand display
Knob for setting the material type, adjusting the arc length (AUTO-(I)), setting the wire speed
in m/min (HAND-(I)), and changing all values in the left-hand display
M Welding functions operating
Manual/automatic LED indicator N LED indicator for units
Select material, select
O Operating button for operating
manual/automatic mode
Welding power knob, functions,
P
material options
Knob for material type, material Q Wire speed, arc length display
strength, wire speed, arc length
inoMIG 350/400/500
button
(% or seconds)
mode selection
LED indicator for operating mode
A
B
C
D
E
F
G
H
BA-0014 • 2020-06-05