Software Update; Use - clage DSX Touch Gebrauchs- Und Montageanleitung

4. CLAGE app "Smart Control"

Software update

Updating the Smart Control app
We recommend using the latest software in order to ensure the impeccable and secure
operation of the CLAGE Home Server.
Any new control app version will be indicated in the app store.
• Updating iOS-devices: For updating your control app, select the "Updates" tab in
the appstore and tap on the "Update" button which is to the right of the control
app.
• Updating Android-OS-devices: For updating your control app, select the Smart
Control app in the Google Playstore and tap on the "Update" button.
Updating the DSX Touch firmware
Note: Do not disconnect your DSX Touch from power supply during updates.
For an update the DSX Touch must be connected to a Wi­Fi network with internet
access.
The instantaneous water heaters is unavailable during the update for several minutes.
1. Go to the device configuration in the settings menu: (Main menu ­ Settings ­
Device).
2. Select the DSX Touch which you want to update.
3. Select "Software", then "Install update" and confirm the following message.
4. Wait for about 3­5 minutes until the control panel restarts and check the function
of the DSX Touch.
If an update is not possible even after multiple attempts, contact the after­sales ser­
vice.

Use

All functions described in chapter "3. How to use" can also be controlled via the Smart
Control app.
43
CLAGE
EN