How To Use; Main Control - clage DSX Touch Gebrauchs- Und Montageanleitung

2. How to use

Main control

The display shows the main control by default. The current status is displayed and by
tapping on the touch screen you get access to various submenus and functions.
Status display, top
User selection
Applications
Temperature display
The coloured scale ring fills up as the temperature setting is increased and the colour
changes from blue when the temperature is low to red when the
temperature is high. In addition, the target temperature is displayed in °C as a figure in
the middle of the display.
Temperature setting
The desired temperature can be selected by tapping on
ting or by dragging along the coloured scale ring for a quick selection within a range
of 20 °C to 60 °C. Tapping
comfort range between 35 and 43 °C by 0.5 °C. If the temperature is set below 20 °C,
the symbol appears in the temperature display and the appliance switches off the
heating function.
User selection
Up to eight user profiles can be created. Every user has the option to save his desired
temperatures for the different uses in a profile. The user profiles can be selected by tap­
ping on the profile image and the temperatures saved in the profile are set (to create
profile, see Section "User").
Applications
Preset applications can be selected here. Simply tap on the desired symbol. Preset applications can be selected here. Simply tap on the desired symbol. Preset applications can be selected here. Simply tap on the desired symbol.
The temperatures set at the factory ( The temperatures set at the factory ( The temperatures set at the factory (
bath = 42 °C, hot water = 48 °C) can be changed for each application via the
temperature setting. If you touch the temperature value in the temperature display or
the application symbol for 3 seconds, the temperature is saved for the selected applica­
tion. The temperature display flashes once for confirmation. Application temperatures
saved in the user profile can be called up at any time by tapping on the corresponding
symbol.
Status display, top
Control lock active (PIN)
The inlet temperature exceeds the target value (appliance does not heat up)
Bluetooth remote control registered
Wi­fi is activated
The appliance is connected to the CLAGE Cloud
Status display, bottom
Display area for functions which require confirmation from the user or which are of
great significance.
33
Temperature display
Status display, bottom
or once changes the temperature by 1 °C, in the
handwash = 35 °C,
CLAGE
Main menu
Temperature setting
and for the fine set­
shower = 38 °C,
EN