Statistics; Settings - clage DSX Touch Gebrauchs- Und Montageanleitung

2. How to use
When the fill quantity is reached, "0 l" flashes briefly on the display and the appliance
stops the water flow by closing the motor valve. A long acoustic signal can also be
heard and an instruction message appears on the display. The motor valve stay closed
until the message is confirmed at the appliance or via app.
Turning off the tap is always necessary, the function must therefore not be used unsu­
pervised.
Before using the bath, make sure that the water temperature is what you want it to be.
Hint: The water amount of the last draw­off is stored in the "Statistics" menu. To
determine the necessary amount of water for your bathtub, fill it with warm water,
then select "Statistics" in the main menu and read out the value of this last drawing.
Enter this value in the automatic function "Fill­Up" to use it for the next bathtub filling.
Note: In the event of a power cut whilst the automatic is running according to the
fill quantity, the water flow is stopped by the motor valve. After power is restored
the valve remains closed a prompt appears on the display and an alarm signal can be
heard until the prompt is acknowledged by tapping on "OK".

Statistics

The statistics save the consumption and usage data for the appliance and display them
in graph format:
Water consumption
Power consumption
Total consumption costs
Wipe from right to the left to scroll the different periods. The consumptions are dis­
played consecutively in diagrams over a period from the last drawing of water, the
consumption today, the consumption yesterday, over the last seven days, the last four
weeks, the last twelve months and the last four years.
Note: The consumption data are not suitable for billing purposes.

Settings

This menu is used for the basic configuration on the appliance. Wipe to scroll through
the different menu items and tap on the values to change settings directly or go to dif­
ferent submenus.
Date / Time: The DSX Touch automatically receives its system time as soon as the
device is connected to a network with Internet access. Alternatively, you can set the
time manually and save it by tapping on "Save date and time".
Language: Select the menu language.
Currency: Select a currency symbol.
Temperature Unit: Defined as °C.
Temperature Limit: The temperature limit can be activated / deactivated in this menu
and the maximum outlet temperature can be limited to a desired value within the tem­
perature setting range by tapping on
Note: If the instantaneous water heater supplies a shower, then the maximum tem-
perature was limited during the installation of the appliance and can only be changed
below this temperature. The temperature limit cannot be fully deactivated in this
case.
35
or .
CLAGE
EN