Anybus Module "Cc Ethernet 100 Mbit; Fig. 21: Anybus Module "Cc Ethernet 100 Mbit" (1-Port-Variant) - Bosch Rexroth PRC 7000 Betriebsanleitung

R911172834 / 02 | PRC7000
5.2.4.2

AnyBus module "CC Ethernet 100 Mbit"

Features:
• Suitable for PRC7000 (slot X30)
• Fast Ethernet (100 Mbit/s), full-duplex mode
• Available as 1-port or 2-port variant. 2-port variant with integrated
switch
• Integrated WEB server
• Simple IP configuration
Function:
• For the simultaneous connection of several timers to the host level
via Ethernet (e. g. connection PRI7000 programming terminal).
PRC 7000.xxx

Fig. 21: AnyBus module "CC Ethernet 100 Mbit" (1-port-variant)

1 Fastening screws
2 NS LED: Network status.
Off:
Green
Green, flashing
Red
Red, flashing
3 Ethernet interface. RJ45 female connector
4 LINK LED: Connection status.
Off
Green
Green, flickering
5 MS LED: Module status.
Off
Green
Red
Red, flashing
Use the "Anybus IPconfig" software for the configuration of the
Ethernet (installation file is included in the PRI7000 software
package, refer to PRI7000 data medium: directory path "Tools/Any­
bus").
Bosch Rexroth AG
Information on this product
1
No power supply or no IP address
The module is active or in wait mode
Waiting for connection
Double IP address or fatal event
Module not active
No connection, no activity
Connection established
Data transmission active
No power supply
Normal function
Severe error or fatal event
Light error
237 / 334
2
3
4
5