Technical Data; Table 26: General Data Across Power Units - Bosch Rexroth PRC 7000 Betriebsanleitung

R911172834 / 02 | PRC7000
15

Technical data

Table 26: General data across power units
Type of construction
I/O interfaces
Number of welding
tasks
Actuating variable for force
Feedback for pressure/ force
For information on dimensioning and load, refer to Section 5.3 from
page 242.
Weld timer with 3-phase medium-frequency inverter
in one housing
According to I/O module used.
Refer to page 235
Up to 10000
Depending on timer type as analog signal (at XGM3)
and/or digital via serial I/O array.
Analog signal is programmable as:
0 to +10V, 0 to 20 mA
0V non−floating
Depending on timer type 1 x digital input (24V
Optocoupler according to EN 61131-2 Type 3) or 2 x
analog input (+-10V).
Desired input can be selected type-specifically.
Bosch Rexroth AG 305 / 334
Technical data
;
DC