Connecting The Water Supply - Bosch Rexroth PRC 7000 Betriebsanleitung

R911172834 / 02 | PRC7000
7.3

Connecting the water supply

Connection of a water supply is only necessary for water-cooled pro­
ducts.
Please note the requirements on cooling in Section 3.2 starting on
"
page 194.
" Make sure that the conditions required for cooling are complied with.
The respective information is provided in Sect. 15, starting on
page 305.
" Use DIN threads in order to reach the necessary frictional connec­
tion.
" Press with flat spanner (SW 17) when you connect the hose nozzle
to the heat sink.
The mechanical construction of the cooling water connection is
identical for all PRC7000 timer types with water cooling. Only the po­
sition of the connections may be different.
Fig. 59: Example: Cooling water connection
Bosch Rexroth AG 283 / 334
Assembly
(11.8 ft.lb)