Assembly; Assembling The Product; Dimensioned Drawings And Locations Of Connections; Fig. 29: Dimensioned Drawing Prc7300 L/W Front View - Bosch Rexroth PRC 7000 Betriebsanleitung

R911172834 / 02 | PRC7000
7

Assembly

7.1

Assembling the product

7.1.1

Dimensioned drawings and locations of connections

Fig. 29: Dimensioned drawing PRC7300 L/W front view

Information on installation conditions (e.g. orientation, permitted am­
bient temperatures) are provided in Chapter 15 on page 305 et seq.
Information on dimensions, necessary cut­outs and screw
fastenings are provided in Section 7.1.1 starting on page 251.
" Please also note the instructions on installation and assembly in
Section 2.6.3 from page 182 as well as Section 3.2 from page 194.
" Use M6 bolts and DIN 267 M6 self­locking nuts for fastening of the
product.
For tightening of the screws: max. tightening torque 6 Nm.
An installation clearance of min. 50mm is
needed on both sides to the left and right of
the product, in horizontal mounting position.
Bosch Rexroth AG 251 / 334
Assembly