Installation And Assembly - Bosch Rexroth PRC 7000 Betriebsanleitung

182 / 334 Bosch Rexroth AG
Safety instructions
2.6.3

Installation and assembly

Dangerous electrical voltage
Possibility of cardiac arrhythmia, burns, shock!
Please ensure that all plant sections worked on in the course of
"
the assembly have been safely isolated from supply and suffi­
ciently protected against accidental/unintended reclosing!
" Observe the discharge times of the capacitors. Discharge time: 5
minutes, < 50 V.
Insufficient degree of protection
Reduction of personal/plant safety!
" The degree of protection of the product described corresponds to
IP 20. Always install it in a switch cabinet satisfying at least degree
of protection IP 54.
Inappropriate performance of installation or assembly works
Possibility of reduction of safety of persons/systems, function
disturbances/restrictions!
" Make sure that installation and assembly are performed by quali­
fied personnel who also has expert knowledge in the field of elec­
tromagnetic compatibility.
Please note the information provided in the technical data (e. g.
"
the environmental conditions).
" Please note the valid safety and accident prevention regulations.
Do not ever deactivate any safety-relevant equipment.
"
Insufficient ergonomics
Possibility of reduction of personal/plant safety, negative effects
on health and/or concentration, function disturbances/restrictions,
operating errors!
Make sure that the devices and especially the operating elements
"
are installed to ensure optimum ergonomics. Operating elements
must be easy to reach at all times, and displays must be easy to
read!
Make sure that the devices and the operating elements are suffi­
"
ciently protected against inadvertent operation or contact.
PRC7000 |
WARNING
CAUTION
R911172834 / 02