Diagnosis Module; Fig. 22: Diagnosis Module: Front Panel View - Bosch Rexroth PRC 7000 Betriebsanleitung

238 / 334 Bosch Rexroth AG
Information on this product
5.2.4.3

Diagnosis module

Effect of control keys
Automatic displays
Only in combination with PRC7000.
Esc

Fig. 22: Diagnosis module: Front panel view

Functions:
• Display of the PRC7000 status
• Display and set of the network configuration
• Display and reset faults / warnings
• Trigger "PRC7000 Reset" (timer will be rebooted)
Esc Return to previous display / level.
Y
(Up) Move up within a menu.
B
(Down) Move down within a menu.
Enter Acknowledge - or - call up the next display / level.
Y B
The and keys both have an autorepeat function. If these keys
are pressed down for more than one second, the autorepeat function
is activated.
Booting: the PRC7000 is currently booting
PRC7000: the PRC7000 is in "Ready" state (normal state)
PRC7000
<E:xxxxx>: a fault is present.
E means Error and xxxx represents the fault code.
The fault must be eliminated and reset in order to return the
timer to "Ready" state.
<W:xxxxx>: a warning is present.
W means Warning and xxxx represents the warning code.
Hardware faults cannot be reset.
Self-acknowledging faults are automatically reset by the system
when the cause of the fault is no longer present (e.g. line voltage off/
on).
The error or warning message overwrite the display. To go back in
the menu press any key. After 30 seconds without operation the
message will be displayed again.
PRC7000 |
8-digit display
B
Y
Enter
R911172834 / 02