Modules; Anybus Module "Profinet Io; Fig. 20: Anybus Module "Profinet Io" (2-Port Variant) - Bosch Rexroth PRC 7000 Betriebsanleitung

R911172834 / 02 | PRC7000
5.2.4

Modules

5.2.4.1

AnyBus module "ProfiNet IO"

Features:
• Suitable for PRC7000 (slot XFE1)
• ProfiNet (RT classification, conformity class B)
• Fast Ethernet (100 Mbit/s), full-duplex mode
• Available as 2-port variant with integrated switch
• Simple IP configuration
Function:
• Connects the timer I/O to the higher-level PLC or the robot via Profi-
Net and
• connects the timer to a programming terminal (PRI7000) via Ether­
net.
PRC 7000.xxx

Fig. 20: AnyBus module "ProfiNet IO" (2-port variant)

1 Fastening screws
2 LED for network status (with respect to ProfiNet controller):
Off:
Green:
Green, flashing:
3,5 LED for Link/Activity (port 1/port 2):
Off:
Green:
Green, flashing:
4,6 Ethernet port connectors with integrated switch
4: Port 1; 6: Port 2
Bosch Rexroth AG
Information on this product
1
no connection to ProfiNet controller
connection to ProfiNet controller established
connection to ProfiNet controller established,
ProfiNet controller is in stop mode
no connection to network
connection to network established
data transfer active
235 / 334
2
3
4
5
6
7