Operating The Product - Bosch Rexroth PRC 7000 Betriebsanleitung

186 / 334 Bosch Rexroth AG
Safety instructions
2.6.5

Operating the product

Defective connection of cables
Possibility of reduction of safety of persons/systems, function
disturbances/restrictions!
" All conductor cross-sections should be rated in accordance with
the installed load.
Make sure that the connecting cables cannot become detached
"
inadvertently.
" Please note the maximum tightening torque for screws and termi­
nals specified in the technical data.
Please ensure that the contact areas are bare, i. e. free from
"
paint, plastic coats or dirt/oxidation.
" Please ensure that the insulation of connecting cables is not
damaged.
Strong electromagnetic fields during the welding sequence
Possibility of function disturbances of cardiac pacemakers, other
implants or also hearing aids!
" Make sure that persons dependent on or using devices of this kind
generally avoid resistance welding equipment.
Make sure that corresponding warning signs are posted at a
"
proper distance from resistance welding equipment.
" Please observe
(2004/40/EC)". It defines the limit values for extremities which
may be exceeded especially in manual welding gun applications.
In cases of doubt, please measure the field strength and provide
additional measures to ensure health and safety at work.
" Please note the Instructions BGV B11, "Accident prevention regu­
lation relating to electromagnetic fields" issued by the Berufsge­
nossenschaft (employers' third party liability insurance associa­
tion).
PRC7000 |
WARNING
WARNING
EC directive „Electromagnetic
R911172834 / 02
fields