Bosch Rexroth PRC 7000 Betriebsanleitung Seite 195

R911172834 / 02 | PRC7000
General notes regarding damage to property and products
Overheating or condensation due to insufficient cooling
Possibility of temporary interruption of the welding process, a re­
duced useful life of the product, destruction of the device, damage
to the electrical equipment, unexpected plant reactions!
" Make sure that the conditions for sufficient cooling set forth in the
technical data are met.
" Make sure that air-cooled devices are equipped with forced cool-
ing. Cooling by means of convection is not sufficient!
" Make sure that no condensation forms on water-conducting
components.
If that is not possible, a sufficient discharge and protection against
condensation must be provided.
Use air conditioning systems, if required.
Bosch Rexroth AG
NOTICE
195 / 334