Preparing Conform Cannula Handpiece - Nouvag Vacuson 60 LP Bedienungsanleitung

Vacuson 60 LP
3. Rotate Turn and Tilting Lever by 180° (Turn and
Tilting Lever now facing away from the grasp).
Make sure the gripper catches the rim of the jar.
Turn and Tilting Lever in
locked position.
For further information please refer to the operation manual delivered with the secretion jars,
Art. No. 31732.
6.4

Preparing Conform Cannula Handpiece

1
1) Unscrew tube adapter (6) from handpiece (2), if not done already.
2) Press the handpiece (2) firmly onto the motor (3), until it clicks into position. Check fitting with counter mov-
ment.
3) Pull the cord of the electonic motor (4) through the blue threaded ring (5) which later will be screwed on to the
grasp.
4) Push the motor-handpiece assembly all the way through the grasp (1) as far as it will go.
5) Srew tube adapter (6) back on to the handpiece (2).
6) Connect silicon tube (7) with tube adapter (6) and tube connection at the grasp.
7) Screw blue threaded ring (5) to the grasp (1).
8) Graft suction tube (8*) on to the provided connection of the grasp.
9)
Attach cannula (9*) onto the adapter of the handpiece and tighten the nut.
(* Part is optional availlable!)
Operating Instructions, Vacuson 60 LP, Art. No. 31793, V46/13
4. Flap down Turn and Tilting Lever into the desig-
nated groove.
Turn and Tilting Lever locked
and secured.
3
Click
6
9
4
5
7
5
1
EN
8
7