Menu Structure And Navigation - Canton Smart Soundbar 9 Bedienungsanleitung

English

Menu Structure and Navigation

Overview
Most settings of the Smart Soundbar 9 are included into the main menu. This settings menu is controlled by the infrared remote control deli-
vered with the device. The settings menu is displayed by the OSD (On Screen Display). The LED display in the Soundbar shows the respective
function in the form of an abbreviation when the menu is activated. This means that the Soundbar can also be adjusted without a screen.
Below, please find an instruction how to navigate through the menu.
Using the Remote Control:
• To enter the menu, press the "M" button.
• To enter the next menu level, press the "OK" button.
• To navigate upwards or downwards in the menu, press the Up
• To change the value of a parameter, press the "+" or "–" button.
• To enter the previous menu level, press the "M" button.
• To exit the menu:
a) Either press and hold the "M "button until the selected input (e.g. TV) is displayed, or
b) wait for 30sec without pressing any button on the remote control.
Note: To change the default On-Screen display language from German to English please enter the main menu. Select the menu item
Systemeinstellung [SYS] and then the item Sprache [LAN]. You can find additional information in the chapter Language [LAN].
74
" " or Down " " key.