Network Reset [Nwr]; Wireless Setup [Wis] - Canton Smart Soundbar 9 Bedienungsanleitung

Network Reset [NWR]

This function is to reset all network settings stored on the Soundbar 9.
Caution: All settings you have made and stored on the Soundbar's WiFi module will be deleted!
To perform the reset please do as follows:
Power up the Soundbar 9 by pressing the Power button " " on the remote.
1
To enter the menu, press the "M" button.
2
Use the " " or " " button to navigate into the menu Network Setup [NWS] and confirm with the "OK" button.
3
Use the " " or " " button to select the funktion Network Reset [NWR] and confirm with the "OK" button. The menu shows the Net-
4
work Reset menu and the "No" is selected, the display shows [NO].
If you want to cancel the reset precedure, press "OK", or press the menu key "M".
5
If you want to perform the reset, select "Reset all" using
6
The OSD shows "Please Wait", the display still shows [YES]. After the reset-process (ca. 30-40 seconds) the Soundbar 9 goes back into
7
normal mode. The WiFi module reboots. During the starting process the LED flashes green rapidly.

4. Wireless Setup [WIS]

The fourth item of the Main Menu is the Wireless Setup which is used to set-up both the wireless speaker connection and the Bluetooth
wireless technology. It contains the items:
• Wireless Speaker Pairing [WSP]
• RF Power [TXP]
• RF Channel [CHN]
• Bluetooth [BT]
– BT Pairing [BTP]
– BT Select [BTS]
– Bluetooth Reset [BRE]
– Autoplay [ATP]
" " or " " key and press "OK". The display shows [YES].
English
®
3 8 9