Network Info [Nwi / Wii] - Canton Smart Soundbar 9 Bedienungsanleitung

English
To leave the menu item, press the"M" button.
6
After a shutdown (Smart Soundbar 9 disconnected from the mains) it takes up to 90 seconds until the firmware version for the WiFi
Note:
module [WIF] and the Google Cast [GC] version can be displayed.
Network Info [NWI]
This menu item is used to view all information about the network and related settings of the Soundbar 9.
The listed items have the following meanings:
• IP Adress [IP]:
• MAC Adress [MAC]:
• Name [NAM]:
• SSID [SSI]:
• WiFi Band [BAN]:
• STS Wireless [WCH]:
To view the network information, do the following:
To enter the menu, press the "M" button.
1
Use the " " or " " button to navigate into the menu System Info [INF] and confirm with the "OK" button.
2
Select the menu item Network Info [NWI] and confirm with the "OK" button. All network informations will the be displayed as a list in
3
case you have have TV connected.
In case you do not have a TV connected to the Soundbar 9 you can select the specific information by using the
4
press "OK" to confirm. The network information will then be shown as scroll text in the display. To exit the selected info press
the menu button "M".
Repeat step 4 until you have all needed informations.
5
To leave the menu item, press the"M" button.
6
• The IP address and frequency band of the WiFi module (WiFi band) can only be displayed after the Smart Soundbar 9 is connected
Notes:
to your network via WiFi or network cable.
• If the Soundbar is connected via network cable, it is not possible to display the SSID.
96
The IP (internet protocol) adress of the WiFi module assigned by the network-router.
The Media Access Control adress is a unique, unchangeable identification number of the WiFi module.
The (network)name of the Soundbar 9 that has been set during the installation process. The default name is
set as Smart Soundbar 9.
The name of the connected WiFi network.
The current frequency band of the WiFi module.
The current frequency band of the wireless audio module.
" " or " " buttons and