Dynamic Range Control [Drc]; Language [Lan]; Factory Reset [Res] - Canton Smart Soundbar 9 Bedienungsanleitung

Compression [DRC]
Dynamic Range Control (DRC) is a setting option created by Dolby Laboratories. When activated, the dynamic range of encoded data
streams can be automatically reduced, which also reduces differences in volume. This makes it possible to enhance quiet tones and
suppress loud ones. By default this function is deactivated.
To change the setting, do the following:
To enter the menu, press the "M" button.
1
Use the " " or " " button to navigate into the menu System Setup [SYS] and confirm with the "OK" button.
2
Select the function Compression [DRC] and confirm with the "OK" button.
3
Select the wanted value using the "+" or "-" key:
4
[ON] means the DRC function is activated and the dynamic range is controlled by the meta data of the data stream.
[OFF] means the function is deactivated and the dynamic range will not be controlled.
Press the "M" button to exit this menu item.
5

Language [LAN]

With this option you can change the On-Screen Menu (OSD) language from German to English and backwards.
To change the (menu)language please do as follows:
To enter the menu, press the "M" button on your remote control.
1
Use the " " or " " button to navigate into the menu System Setup [SYS] and confirm with the "OK" button.
2
Use the " " or " " button to select the menu item Language [LAN] and confirm with the "OK" button.
3
Select the wanted language English or German using the "+" or "-" key.
4
Then press "OK" again to leave the menu.
5

Factory Reset [RES]

With this function you can reset the Smart Soundbar 9 to its factory settings. In case the Soundbar 9 has a mailfunction or does not connect to
a network anymore, please perform such a reset and repeat the installation process before you contact the customer support.
Caution: ALL settings you have made, transmitted IR codes, the WiFi connection and paired (mobile) devices and speakers will be deleted!
English
3 8 7