Firmware Info [Fwi] - Canton Smart Soundbar 9 Bedienungsanleitung

– STS Wireless [STS]
– DSP Audio [DSP]
– OSD Fonts [OSD]
• Network Info [NWI]
– IP Adress [IP]
– MAC Adress [MAC]
– Name [NAM]
– SSID [SSI]
– WiFi Band [BAN]
– STS Wireless [WCH]

Firmware Info [FWI]

This feature helps you to check and verify the firmware installed on the Smart Soundbar 9. Before doing a service request, please check and
note the indicated version numbers.
The listed items have the following meanings:
• WiFi [WIF]: The firmware version of the build-in WiFi module.
• Google Cast [GC]: The Chromecast build-in for Audio version.
• MCU Host [MCU]: The firmware version of the main control processor of the Soundbar 9 (like the OS on a computer).
• STS Wireless [STS]: The firmware version of the wireless audio module.
• DSP Audio [DSP]: The firmware version of the digital sound and signal processor.
• OSD Fonts [OSD]: The version of the On-Screen display fonts and display indications.
To view the firmware information, do the following:
To enter the menu, press the "M" button.
1
Use the " " or " " button to navigate into the menu System Info [INF] and confirm with the "OK" button.
2
Select the menu item Firmware Info [FWI] and confirm with the "OK" button. All firmware versions will the be displayed as a list in case
3
you have have TV connected.
In case you do not have a TV connected to the Soundbar 9 you can select the specific firmware version by using the
4
and press "OK" to confirm. The information about the firmware version will then be shown as scroll text in the display.
To exit the selected info press the menu button "M".
Repeat step 4 until you have all needed informations.
5
English
" " or " " buttons
3 9 5