Unpacking; Running In; Setting Up The Remote Control - Canton Smart Soundbar 9 Bedienungsanleitung

Unpacking

Unpack the box carefully and check that all the following parts
are present:
Delivery content
• 1x Smart Soundbar 9
• 1x Remote control
• 1x Power cord
• 1x HDMI® cable
• 1x Optical digital audio cable
• 1x Coaxial digital audio cable
• 1x Analog stereo audio cable
• 1x Short manual
• 1x Spotify Flyer
• 8x Equipmentfeet
Connection
Place the Soundbar 9 in the desired location and connect it
to the power input using the power cord. Make sure that
your TV is plugged in. If you want to connect the Sound-
bar 9 to the WiFi, please make sure your WiFi router is
active and has a connection to the Internet.

Running in

Running-in phase until the development of the
maximum sound properties: 15 – 20 operating hours.
• Please listen at normal volume during this time
• Avoid extremely high levels
• Listen to a variety of audio material
Setting up the
remote control
The remote control comes with a
battery already installed. Simply
remove the protective film to
activate. When replacing the
battery ensure that it is correctly
inserted according to the polarity
markings (+/–).
Only use the battery specified for
this system (CR 2032).
English
OPEN CLOSE
CR 2032
3 6 3