Sleep Timer [Slp]; Ir Menu [Irm]; Ir Learn [Irl] - Canton Smart Soundbar 9 Bedienungsanleitung

English
• Max Volume
• Dynamic Range Control (DRC)
• Language
• Factory Reset

Sleep Timer [SLP]

If this function is enabled, the system shuts down to standby mode after a specified time. You can select 15, 30, 45 or 60 Minutes.
If the value OFF is selected, the function is disabled.
To adjust the shut down time, please follow the next steps:
To enter the menu, press the "M" button.
1
Use the " " or " " button to navigate into the menu System Setup [SYS] and confirm with the "OK" button.
2
Select the menu Sleep Timer [SLP] and press the "OK" button to confirm.
3
Select the desired time using the + or – keys.
4
Press the "M" button to exit this menu item.
5
The Sleep Timer will be disabled automatically after a power down. That means the shut down time must be selected after every
Note:
power up sequence.

IR Menu [IRM]

This menu includes all functions relevant for the infrared operation of the speaker. It consists of three submenus.

IR Learn [IRL]

The system can learn the infrared codes of your TV remote control and therefore allows you to control the functions of the soundbar and
your TV via one remote control. You can allocate any key of the TV remote control to the soundbar. When choosing a key, make sure that
the instructions for the soundbar do not conflict with the TV. We recommend that you deactivate the internal loudspeakers of the TV once
the soundbar is connected.
Then you can use the volume keys for the soundbar.
To learn the IR codes of a third party remote, hold the TV remote control in position and do the following steps:
To enter the menu, press the "M" button.
1
Use the " " or " " button to navigate into the menu System Setup [SYS] and confirm with the "OK" button.
2
78