Input Configuration [Inp] - Canton Smart Soundbar 9 Bedienungsanleitung

Press the "M" button to exit this menu item.
5

Input Configuration [INP]

With the default factory setting all physically available inputs are already assigned with a source designation. Therefore, the device display and
the screen do not show the designation of the (physical) input, but the designation of a (possible) source device. These are as follows:
Physical input
HDMI ® Input 1
HDMI Input 2
®
HDMI Input 3
®
HDMI Output
®
Optical digital input
Coax digital input
Analogue line input L/R
You can change the name assigned to an input to suit your source device. It is also possible to deactivate (physical) inputs so that they are no
longer displayed when switching through. The name for the input BT (Bluetooth
To change the name and/or deactivate the input proceed as follows:
To enter the menu, press the "M" button.
1
Use the " " or " " button to navigate into the menu System Setup [SYS] and confirm with the "OK" button.
2
Select the item Input Config [INP] using the
3
Then select the wanted input by the
4
the "+/-" buttons: "- - -" (input disabled), TV, BDB, SAT, CD, DVD, CAM, REC, PAD, POD, TAB, TUN, DAB, PS, VCR, ATV, PC, AUX.
After selecting the name, press the "OK" button.
To assign a name to another input, repeat steps 3 to 5.
5
To leave this menu item, press the "M" button.
6
• Should you assign a name to an input that is already assigned, the input previously assigned with this name will be deactivated
Notes:
("- - -"). To continue using this input, you must assign a different name. Each source name can be assigned only once.
• Inputs which have been deactivated "- - -" are no longer displayed when selecting the inputs (input buttons
This simplifies the selection of the desired input.
OSD Display Name
HDMI1 [HD1] = BDP (Blu-ray player)
HDMI2 [HD2] = SAT (Satelite receiver)
HDMI3 [HD3] = PS (Gaming console)
ARC [ARC] = TV (TV)
OPT [OPT] = CD (CD player)
COAX [COA] = DVD (DVD player)
Analog [ANA] = AUX (Analogue device)
" " or " " button and confirm with the "OK" button.
" " or " " button and press "OK". You can choose from the following predefined designations using
® ) or NET (Network) can not be changed.
English
" " or " ").
3 8 3