User Information; Safety Instructions; Electromagnetic Compatibility (Emc) - Bosch EPS 625 Originalbetriebsanleitung

Wear safety shoes
Wear safety gloves
Wear a safety mask
Comply with these original instructions and all
other technical documentation relating to the
EPS 625.
Do not use diesel. Use only ISO 4113 test oil.
Dispose of used electrical and electronic devic-
es, including cables, accessories and batteries,
separately from household waste.
Robert Bosch GmbH
User information | EPS 625 | 45
2.

User information

2.1 Important notes
Important information on copyright, liability and warran-
ty provisions, as well as on equipment users and com-
pany obligations, can be found in the separate manual
"Important notes on and safety instructions for Bosch
Diesel Test Equipment". These instructions must be care-
fully studied prior to start-up, connection and operation
of the EPS 625 and must always be heeded.
2.2

Safety instructions

All the pertinent safety instructions can be found in
the separate manual "Important notes on and safety
instructions for Bosch Diesel Test Equipment". These
instructions must be carefully studied prior to start-up,
connection and operation of the EPS 625 and must al-
ways be heeded.
2.3

Electromagnetic compatibility (EMC)

The EPS 625 satisfies the requirements of the EMC di-
rective 2004/108/EG.
i
The EPS 625 is a class/category A product as de-
fined by EN 61 326. The EPS 625 may cause high-fre-
quency household interference (radio interference)
so that interference suppression may be necessary.
In such cases the user may be required to take the
appropriate action.
en
|
1 689 988 258 2017-05-30