Symbols Used; User Information - Bosch FWA 4650 Erstinbetriebnahme Und Nachrüstung

1.

Symbols used

1.1 In the documentation
1.1.1 Warning notices -
Structure and meaning
Warning notices warn of dangers to the user or
people in the vicinity. Warning notices also indicate
the consequences of the hazard as well as preventive
action. Warning notices have the following structure:
KEY WORD – Nature and source of hazard!
Warning
symbol
Consequences of hazard in the event of
failure to observe action and information
given.
¶
Hazard prevention action and information.
The key word indicates the likelihood of occurrence
and the severity of the hazard in the event of non-
observance:
Key word Probability of
occurrence
DANGER Immediate impending
danger
WARNING Possible impending
danger
CAUTION Possible dangerous
situation
1.1.2 Symbols in this documentation
Symbol Designation Explanation
Attention Warns about possible property damage.
!
Information Practical hints and other
i
useful information.
1. Multi-step Instruction consisting of several steps.
2. operation
One-step Instruction consisting of one step.
e
operation
Intermediate An instruction produces a visible

result intermediate result.
Final result There is a visible final result on
"
completion of the instruction.
1.2 On the product
!
Observe all warning notices on products and ensure
they remain legible.
Robert Bosch GmbH
Severity of danger if
instructions not observed
Death or severe injury
Death or severe injury
Minor injury
Symbols used | FWA 4650 | 45
2.

User information

2.1 Important notes
Important information on copyright, liability and
warranty provisions, as well as on equipment users
and company obligations, can be found in the separate
manual "Important notes on and safety instructions for
Bosch Wheel Test Equipment". These instructions
must be carefully studied prior to start-up, connection
and operation of the FWA 4650 and must always be
heeded.
2.2 Safety instructions
All the pertinent safety instructions can be found in
the separate manual "Important notes on and safety
instructions for Bosch Wheel Test Equipment".
These instructions must be carefully studied
prior to start-up, connection and operation of the
FWA 4650 and must always be heeded.
!
Installation is only to be performed by a qualified
electrician.
!
The wheel alignment unit is only to be used in
enclosed areas.
2.3 Electromagnetic compatibility (EMC)
The FWA 4650 satisfies the requirements of the
EMC directive 2014/30/EU.
The FWA 4650 is a class B product as per
EN 61 326.
2.4 Applicability
i
These instructions apply to commissioning of the
WLAN-Box in conjunction with an FWA 4650
wheel alignment unit.
2.5 Other applicable documentation
Type of document
User information
Initial operation FWA 4650
Original instructions FWA 4650
Platform adapter fitting instructions (elevated)
Platform adapter fitting instructions
(under-floor)
Pit adapter fitting instructions
Tab. 1: Other documentation applicable to WLAN-Box for
FWA 4650
en
Item number
1690326004
1690706005
1690706006
1690706010
1690706009
1690706011
|
1 690 706 220 2016-09-14