General Instructions On Equipment And Product Damage - Aventics AES Serie Systembeschreibung

AVENTICS | AES I/O Modules, Analog | R412018147–BAL–001–AG
3 General Instructions on Equipment and
Product Damage
Disconnecting electrical connections while under voltage will destroy the electronic
components of the valve system!
Large differences in potential occur when disconnecting electrical connections under voltage,
which could destroy the valve system.
Make sure the relevant system component is not under voltage before assembling the valve
system or when connecting and disconnecting it electrically.
Malfunctions in the fieldbus communication due to incorrect or insufficient grounding!
Connected components receive incorrect or no signals. Make sure that the ground connections of
all valve system components are linked
– to each other
– and to ground
with electrically conductive connections.
Verify proper contact between the valve system and ground.
The valve system contains electronic components that are sensitive to electrostatic discharge
(ESD)!
If the electrical components are touched by persons or objects, this may lead to an electrostatic
discharge that could damage or destroy the components of the valve system.
Ground the components to prevent electrostatic charging of the valve system.
Use wrist and shoe grounding straps, if necessary, when working on the valve system.

General Instructions on Equipment and Product Damage

NOTICE
75