Plc Configuration Of The Av Valve System - Aventics AES Serie Systembeschreibung

AVENTICS | AES I/O Modules, Analog | R412018147–BAL–001–AG
84

PLC Configuration of the AV Valve System

5 PLC Configuration of the AV Valve System
For the bus coupler to correctly exchange data from the modular valve system with the PLC, the PLC
must be able to detect the valve system structure. In order to represent the actual configuration of
the valve system's electrical components in the PLC, you can use the configuration software of the
PLC programming system. This process is known as PLC configuration.
Configuration error!
An incorrect valve system configuration can cause malfunctions in and damage to the overall
system.
The configuration may therefore only be carried out by qualified personnel (see "2.4
Personnel qualifications" on page 73).
Observe the specifications of the system owner as well as any restrictions resulting from the
overall system.
Observe the configuration software documentation.
You may configure the valve system on your computer without the need to connect the unit. The
data can then be loaded on the system at a later time on site.
A detailed description of the PLC configuration can be found in the system descriptions for the
bus couplers.
NOTICE