Output Module 2Ao2M12E - Aventics AES Serie Systembeschreibung

AVENTICS | AES I/O Modules, Analog | R412018147–BAL–001–AG
6.3.7

Output module 2AO2M12E

The analog outputs are assigned to the following addresses via input parameters:
Table 55: Parameters of output module 2AO2M12E
Address Name
01 Reserved
02 Reserved
03 Reserved
04 Reserved
05 Reserved
06 Reserved
07 Reserved
08 Reserved
The parameters of the output modules for analog outputs are structured as follows:
Table 56: Structure of the "output channel configuration" parameter
Bit 7 Bit 6 Bit 5
filter,
0 0 00: 16 bits two's complement
01: 13 bits two's complement
10: Standardized 16 bits
two's complement
11: 16 bits direct
1)
See "6.3.8 Data formats and value ranges of output module 2AO2M12E"
The default setting for the "output channel configuration" parameter (bit 7–bit 0) is 0.
If a parameter contains the bit combination "reserved" (bit 7, bit 6, bit 2–bit 0), the default setting 0
is automatically assigned internally for these bits.
Address Name
09 Configuration of output channel 1
10 Configuration of output channel 2
11 Reserved
12 Reserved
13 Reserved
14 Reserved
15 Reserved
16 Reserved
Bit 4 Bit 3
1)
Data format Type
0: Voltage
1: Current
107
Structure of the I/O Module Data
Bit 2 Bit 1 Bit 0
Nominal value of the output range
Voltage Current
000: 0 to 10 V 0 to 20
001: ±10 V mA
010: Reserved Reserved
011: Reserved 4 to 20
100: Reserved mA
101: Reserved Reserved
110: Reserved Reserved
111: Reserved Reserved
Reserved
Reserved