About This Documentation; Documentation Validity; Required And Supplementary Documentation; Presentation Of Information - Aventics AES Serie Systembeschreibung

AVENTICS | AES I/O Modules, Analog | R412018147–BAL–001–AG
1

About this Documentation

1.1

Documentation validity

This documentation is valid for I/O modules from the AES series with the following part number:
R412018277, 2-channel analog input module with two 5-pin M12x1 connections (2AI2M12E)
R412018278, 4-channel analog input module with four 5-pin M12x1 connections (4AI4M12-E)
R412018287, 2-channel analog combination module with two 5-pin M12x1 connections for E/P
pressure control valves with external supply (2AI2AO2M12AE)
R412018281, 2-channel analog output module with two 5-pin M12x1 connections (2AO2M12E)
R412018291, 4-channel input module for pressure measurement 0 bar to 10 bar (pressure
measurement module) with four push-in connections for tubing diameter D = 4 mm and
5/32 inch (4P4D4)
R412018292, 4-channel input module for vacuum/pressure measurement -1 bar to +1 bar
(vacuum/pressure measurement module) with four push-in connections for tubing diameter
D = 4 mm and 5/32 inch (4VP4D4)
The documentation is geared toward programmers, electrical engineers, service personnel, and
system owners.
This documentation contains important information on the safe and proper commissioning and
operation of the product and how to remedy simple malfunctions yourself.
The system descriptions for bus couplers and valve drivers can be found on the CD
R412018133, included on delivery. Select the appropriate documentation based on your
fieldbus protocol.
1.2

Required and supplementary documentation

Only commission the product once you have obtained the following documentation and
understood and complied with its contents.
Table 1: Required and supplementary documentation
Documentation
System documentation
Documentation for PLC configuration tool
Assembly instructions for all current components
and the entire AV valve system
System descriptions for connecting the I/O
modules and bus couplers electrically
All assembly instructions and system descriptions for the AES and AV series, as well as the PLC
configuration files, can be found on the CD R412018133.
1.3

Presentation of information

To allow you to begin working with the product quickly and safely, standard warnings, symbols,
terms, and abbreviations are used in this documentation. For better understanding, these are
explained in the following sections.
About this Documentation
Document type Comment
Operating To be created by system owner
instructions
Software manual Included with software
Assembly Printed documentation
instructions
System description PDF file on CD
69