Zoom RT-123 Bedienungsanleitung Seite 87

ZOOM RhythmTrak RT-123
1.TRANSMITTED DATA
NONE.
2.RECOGNIZED DATA
1) CHANNEL VOICE MESSAGES
STATUS
1000 nnnn
1001 nnnn
1001 nnnn
1011 nnnn
1100 nnnn
1110 nnnn
NOTE: nnnn = MIDI Channel Number ( 0000 - 1111 )
1. Note Off Messages on Drum Channel(s) will be ignored.
2. Relationship between Program Numbers and Kit Numbers are assigned as
described in Drum Kits/Bass Program List.
3. Pitch Bend values will be used only MS7bits.
Pitch Bending will be effected continuously only on Bass Channel.
Panpot Controller will also be effected only on Bass Channel.
MIDI Implementation
SECOND THIRD
0kkk kkkk 0vvv vvvv
0kkk kkkk 0000 0000
0kkk kkkk 0vvv vvvv
0ccc cccc 0vvv vvvv
0ppp pppp —— ——
0vvv vvvv 0vvv vvvv
DESCRIOTION
NOTE OFF (See NOTE 1)
kkk kkkk : Note No.
vvv vvvv : Note Off Velocity (ignored)
NOTE OFF (See NOTE 1)
kkk kkkk : Note No.
NOTE ON (See NOTE 1)
kkk kkkk : Note No.
vvv vvvv : Note On Velocity (not 0)
CONTROL CHANGE
ccc cccc : Control No.
7 Volume
10 Panpot (See NOTE 3)
vvv vvvv : Control Value
PROGRAM CHANGE
ppp pppp : Program Number (See NOTE 2)
PITCH BENDER CHANGE (See NOTE 3)
vvv vvvv vvv vvvv Pitch Bend Value