Technical Data; Instructions - Parkside PDT 40 E4 Bedienungs- Und Sicherheitshinweise

Technical data


Dimensions:
Weight
(without fasteners):
Trigger type:
Maximum permissible
Legende der verwendeten Piktogramme pressure:
Einleitung
........................................................................................................................................Seite 6
Bestimmungsgemäße Verwendung ...................................................................................................Seite 6
Ausstattung ..........................................................................................................................................Seite 6
Recommended pressure
Lieferumfang .......................................................................................................................................Seite 6
range:
Technische Daten ................................................................................................................................Seite 7
Air consumption per
Sicherheit drive in process:
........................................................................................................................................Seite 7
Recommended lubricant:
Allgemeine Sicherheitshinweise ........................................................................................................Seite 7
Vor der Inbetriebnahme Loading capacity:
Nail lengths:
Gerät aufstellen ..................................................................................................................................Seite 8
5,7 mm
Inbetriebnahme
Heizstufen und Ventilator ein- / ausschalten .....................................................................................Seite 8
Temperatur einstellen..........................................................................................................................Seite 9
Staple lengths:
Gerät ausschalten ..............................................................................................................................Seite 9
Staple width:
Überhitzungsschutz ............................................................................................................................Seite 9
Recommended
Fehlerbehebung Internal hose diameter:
Compressed air quality:
Wartung, Reinigung und Lagerung
Service
...............................................................................................................................................Seite 10
Special references

Garantie
...........................................................................................................................................Seite 11
Entsorgung
.....................................................................................................................................Seite 11

Instructions


Original-EG-Konformitäts erklärung / Hersteller
The following standard is applicable to fastener
driving tools as per EN 792-13:2000 „Hand-held
non-electric power tools – safety requirements –
Part 13: Fastener driving tools".
The standard requires that
▪
Only those fasteners which are specified in the
operating instructions (see technical data) shall
be used in fastener driving tools. The fastener
driving tool and the fasteners specified in the
240 x 235 x 58 mm
(L x H x W)
1 197 g
Compressed air
8 bar
4 to 7 bar
approx. 0.09 litre
Compressed air
special oil
100 pcs
....................................................................................................Seite 8
15 mm, 20 mm,
25 mm, 30 mm,
32 mm, 35 mm,
........................................................................................................................Seite 8
38 mm, 40 mm,
45 mm, 50 mm
10–40 mm
5,7 mm
9 mm
........................................................................................................................Seite 10
Cleaned,
oil-misted and
condensate-free
Introduction / Special references Introduction / Special references
Introduction / Special references
operating instructions are to be considered as
one unit safety system.
▪
Quick-action couplings shall be used for
connection to the compressed air system and
the non-sealable nipple must be fitted at the
tool in such way that no compressed air re-
mains in the tool after disconnection.
▪
Oxygen or combustible gases shall not be
used as an energy source for compressed air
.........................................................Seite 6
operated fastener driving tools.
▪
Fastener driving tools shall only be connected
to an air-supply where the maximum allowab-
le pressure of the tool cannot be exceeded by
more than 10 %; in the case of higher pressu-
res, a pressure reducing valve which includes a
downstream safety valve shall be built into the
compressed air supply.
▪
Only spare parts specified by the manufacturer
or his authorized representative shall be used
in the repair of fastener driving tools.
▪
Repairs shall be carried out only by the ma-
nufacturers' authorized agents or by other
experts, having due regard to the information
given in the operating instructions.
NOTE
Experts are those who, as a result of professional
training or experience, have sufficient expertise
in the field of fastener driving tools and sufficient
familiarity with relevant government industrial pro-
tection provisions, accident prevention regulations,
.........................................................................Seite 10
directives, and generally recognized technical re-
gulations (e.g. CEN and CENELEC-standards),
to be able to assess the safe condition of fastener
driving tools.
▪
Stands for mounting the fastener driving tools
to a support, for example to a work table,
shall be designed and constructed by the stand
.........................................Seite 12
manufacturer in such a way that the fastener
driving tools can be safely fixed for the inten-
ded use, thus for example avoiding damage,
distortion, displacement.
Special fields of application for the fastener driving
tools may require the observance of additional
provisions and regulations (for example working
in areas subject to an explosion hazard).
Inhaltsverzeichnis
Introduction / Safety
GB/IE/NI DE/AT/CH 19 5