Herunterladen Inhalt Inhalt Diese Seite drucken

Introduction; Intended Use; Features; Scope Of Delivery - Parkside PHET 15 A1 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung

Elektrotacker
Vorschau ausblenden Andere Handbücher für PHET 15 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 43

Introduction

Electric nailer / stapler PHET 15 A1
Introduction
We congratulate you on the purchase of your new
device. You have chosen a high quality product. The
instructions for use are part of the product. They
contain important information concerning safety,
use and disposal. Before using the product, please
familiarise yourself with all of the safety information
and instructions for use. Only use the unit as de-
scribed and for the specified applications. If you
pass the product on to anyone else, please ensure
that you also pass on all the documentation with it.

Intended use

The staple gun is for private use designed to staple
paper, insulating material, leather, fabric (manmade
and natural fibres) and similar material to softwood
or faux wood. Only use in dry areas. Any other uses,
and / or modifications to the appliance, are deemed
to be improper usage and may result in serious phy-
sical injury. The manufacturer is not liable for damage
caused by improper use. This appliance is not in-
tended for commercial applications.

Features

Start lockout
1
Trigger
2
Magazine
3
Unlocking device
3a
Magazine well
4
Fill level indicator
5

Scope of delivery

1 Electric nailer / stapler PHET 15 A1
400 Staples 10 mm
100 Nails 14 mm
1 Operating instructions
6
GB
Downloaded from
www.Manualslib.com
manuals search engine

Technical Data

Model:
PHET 15 A1
Rated voltage:
230–240 V∼ 50 Hz
Rated input power: 45 W
Protection class:
II /
Fine staples:
Width of staples: 11.4 mm externally
Staple lengths:
Type
53
6–14 mm
Nails:
Nail lengths:
Type
47
max. 15 mm
Noise and vibration data:
Measured values for noise are determined in accord-
ance with EN 60745. The A-weighted noise level
of the electrical power tool are typically:
Sound pressure level:
Sound power level:
Uncertainty K:
Wear hearing protection!
Vibration total values determined according to
EN 60745:
Vibration emission value a
Uncertainty K = 1.5 m / s
2
The vibration level specified in
these instructions was measured in accordance with
an EN 60745 standardised measurement process
and can be used to compare equipment. The vibra-
tion emission value specified can also serve as a
preliminary assessment of the exposure.
The vibration level will change according to the ap-
plication of the electrical tool an in some cases may
exceed the value specified in these instructions. Re-
gularly using the electric tool in such a way may make
it easy to underestimate the vibration.
6–14 mm
max. 15 mm
73.82 dB(A)
84.82 dB(A)
3 dB
= 4.678 m / s
,
2
h
.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis