Entering Mildata Batch Codes - Milnor 48040F7N Betriebshandbuch

Chapter 2. Normal Machine Operation
Figure 12: Select Remote Formula Screen
Display or Action
0928
After you've retrieved and verified the formula, the Mark VI controller prompts for any
configured batch data.

Entering Mildata Batch Codes

2.1.4.3.
to prompt you for the batch data fields selected in machine configuration (see the related section
in document BICWCC01). The data you enter is sent to the Mildata computer for accounting and
report generation.
PELLERIN MILNOR CORPORATION
Explanation
Select formula 928 (example) stored on the Mildata computer.
The Mark VI controller requests the formula from the Mildata
computer and displays the formula name, as shown in
Confirm that the displayed formula name is the formula you
u
want to run. If the displayed formula isn't the right one for the
loaded goods, press
another number.
—The Mark VI controller uses a screen similar
18
to clear the formula number, then enter
c
Figure 12.
Figure 13