To Run A Wash Formula From The Mildata; Computer; Figure 8 Load Weight Window - Milnor MilTouch 48040F7D Bedienerhandbuch

Normal Operation
2. Touch . The Load Weight window appears, as shown in the following figure.
Figure 8. Load Weight Window
3. Enter the customer code.
a. Touch the value labelled "Customer."
b. Use the keypad to enter a customer code number.
4. Enter the actual weight of the goods in the cylinder.
a. Touch the value labelled "Weight 1."
b. Use the keypad to enter the weight of the goods.
NOTE: Ensure that you measure and enter the actual weight of goods in the
same unit (pounds or kilograms) as the configured machine capacity.
5. Touch to save all the data entered in the window and start the formula.
The Run display appears and the door to the washer-extractor locks.
3.11.2

To Run a Wash Formula from the Mildata

NOTE: When you enable your controller to run Mildata
become unavailable.
18
A... The formula that will be used
to wash the goods
B... The customer (commercial
laundry) or department (insti-
tutional laundry) the batch
(goods) belongs to.
C... The weight of goods in the
machine, divided into pockets.
Weight 2 and Weight 3 are on-
ly used on divided-cylinder
machines.
D... Start the formula
E... Close the window and return
to the Home display
®
BNCLJO06.T05 0000194242 C.2 F.3 H.3 3/5/21 9:45 AM Released
® formulas, the local formulas
Legend

Computer

Pellerin Milnor Corporation