Inhaltsverzeichnis
Werbung
A
B
C
D
E
F
G
H
I
L
M
N
O
P
Q
R
20
A
B
9
ADJUSTABLE TELESCOPIC FORK AD-
JUSTMENT "MARZOCCHI" (V11 S
MY2003 – V11 L
B
)
ALLABIO
The motorcycle is equipped with a hydraulic telescopic
fork with separate adjustment of shock-absorbers dur-
ing rebound and spring preload.
Vehicle attitude setting: each fork leg has an upper screw
"A" for adjusting hydraulic braking during rebound and a
upper nut "B" for adjusting spring preload.
The standard setting of the front fork is such as to satisfy
most driving conditions at low and high speed, either with
reduced load and full load.
However, it is also possible to adjust the setting accord-
ing to the intended use of the vehicle (on «Fork adjust-
ment table»).
For the adjustment, always start from the most
rigid setting.
The triangle " " onto nuts "B" is a reference
for spring preload. Turn adjuster «A» and nuts
«B» gradually by half a turn each time.
Test the vehicle on roads repeatedly for best
adjustment.
Do not overturn adjusters "A", otherwise they
might damage.
Set the same spring preload and hydraulic brak-
ing for both rods: a different setting of the rods
decreases the stability of the vehicle while rid-
ing.
When the spring preload is increased, it is nec-
essary to increase also the hydraulic braking,
in order to avoid sudden jerks while riding.
V11 S
M
2003 - L
PORT
Y
R
C
- C
OSSO
ORSA
AFE
PORT
M
MY 2003 – V11
E
ANS
M
M
2003
E
ANS
Y
S
- B
PORT
ALLABIO VARIANTS
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
