MOTO GUZZI 2003 V11 series Werkstatt-Handbuch Seite 46

A
B
C
D
E
F
G
H
I
L
M
N
O
P
Q
32
B A
D
C
13 HALF-HANDLEBARS
RH
SIDE
Disassembly:
• Remove the accelerator control as described in chapter
4, section G;
• Remove the RH control unit as described in chapter 4,
section P;
• Remove the front brake master cylinder as described
in chapter 1, section G;
• Unscrew the screw "A" and remove the equalizer "B"
from the half-handlebar;
• Tighten the screw "C" and loosen the screw "D";
• Remove the handlebar.
Reassembly:
Carry out the procedures in reverse order.
LH
SIDE
Disassembly:
• Remove the LH control unit as described in chapter 4,
section P;
• Remove the starter control as described in chapter 4,
section G;
• Remove the clutch pump as described in chapter 1,
section G;
• Loosen screw "A" and remove the equalizer "B" from
the half-handlebar;
• Tighten the screw "C" and loosen the screw "D";
• Remove the handlebar.
Reassembly:
Carry out the procedures in reverse order.
V11 S N
PORT AKED AND
V11 L M
E ANS VARIANTS