Declaration Of Incorporation According To 2006/42/Ec (Machinery Directive) - Gemü SUPM SUMONDO Betriebsanleitung

16 Declaration of Incorporation according to 2006/42/EC (Machinery Directive)

according to the EC Machinery Directive 2006/42/EC, Annex II, 1.B for
We,
declare that the following product
Make:
Serial number:
Project number:
meets the following essential requirements of the Machinery Directive 2006/42/EC:
We also declare that the specific technical documentation has been compiled in accordance with part B of Annex VII.
The manufacturer or his authorised representative undertake to transmit, in response to a reasoned request by the national
authorities, relevant information on the partly completed machinery. This transmission takes place:
Electronically
Authorised documentation officer
This does not affect the industrial property rights!
Important note! The partly completed machinery may be put into service only if it was determined, where appropriate, that the
machinery into which the partly completed machinery is to be installed meets the provisions of this Directive.
Commercial name:
Ingelfingen-Criesbach 29-05-2018
Joachim Brien
Head of Technical Department
www.gemu-group.com
Declaration of Incorporation
partly completed machinery
GEMÜ Gebr. Müller Apparatebau GmbH & Co. KG
Fritz-Müller-Straße 6-8
74653 Ingelfingen-Criesbach, Germany
GEMÜ Pneumatically operated single-use diaphragm valve
from 18.11.2013
P6280113 Single_Use
GEMÜ Gebr. Müller Apparatebau GmbH & Co. KG
Fritz-Müller-Straße 6-8
74653 Ingelfingen, Germany
Type SUPM, SUB
49 / 56
Declaration of Incorporation
GEMÜ SUPM