Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
A
5. Check the condition and values of the installed / to be installed fuse (4)
according to chapter 14 Technical Data, page 49.
6. Follow these steps in reverse for assembly. The fuse holder has to clearly snap
into place when installing and has to be aligned flush with the non-heating
device plug.
7. Use the mains power cable to reconnect the shockproof socket with the rear
non-heating device plug.
B
C
(1)
Fig. 12-1 Opening the fuse holder
Screwdriver
(1)
(2)
Non-heating device plug
(2)
Fuse holder
(3)
Fuse
(4)
(3)
(4)
Care and Maintenance
45
US
Werbung
Kapitel
Inhaltsverzeichnis
