Battery Power Indicator - Stryker Power Pro Cot 6500 RUGGED Betriebshandbuch

Battery Power Indicator

Figure 30a - Battery Power Indicator
To check the battery power level, depress lightly on the retract (–) switch (A) to activate the battery power indicator light
(B). The battery power indicator is located at the foot-end control enclosure, represented by a battery icon.
• The indicator lights GREEN when the battery is fully charged or has adequately charged battery power.
• The indicator flashes RED when the battery needs to be recharged or replaced.
WARNING
To avoid risk of electric shock, never attempt to open the battery pack for any reason. If the battery pack case is cracked
or damaged, do not insert it into the charger. Return damaged battery packs to a service center for recycling.
Do not remove the battery when the ambulance cot is activated.
Avoid contact with a wet battery or battery enclosure. Contact may cause injury to the patient or operator.
CAUTION
Only use the battery and charger as specified.
The POWER PRO XT ambulance cot is not for use with an AC adapter.
When charging batteries in an ambulance vehicle, locate the charger either in the forward cab or an enclosed compartment
(i.e. cabinet).
Ensure that the battery is fully charged prior to placing into service. An uncharged or depleted battery may cause poor
ambulance cot performance.
Refer to the D WALT ® manual (Stryker part number 6500-700-006) for battery and charger information.
e
www.stryker.com
Cot Features
6500-600-001 REV A
Figure 30b - Retract Switches