Changing The Time Span Of The Input Lock - G&D DP1.2-VisionXG-Fiber Installation Und Bedienung

Changing the time span of the input lock

When carrying out keyboard or mouse inputs at a console, the KVM extender auto-
matically locks the input devices of the concurrent console. The lock is lifted if no
input is made at the active console within the adjusted timing of the input lock
(default: 1 second).
After the lock has been lifted, both users can operate the computer again.
The time span of the input lock can be adjusted between 0 and 90 seconds.
NOTE: To disable the function, enter the value
How to change the timespan of the input lock:
1. Press
Ctrl+Num
2. Select the row
3. Select the row
4. Under Multiuser input lock
(0 to 90 seconds).
Entering the value 0 deactivates the input lock.
5. Press F2 to save your settings.
1. In the menu, click on
2. Click on the KVM extender you want to configure and then click
on
Configuration
3. Click on the tab
4. Enter the desired time period of the input lock (0 to 90 seconds) in the field
Multiuser input lock
Entering the value 0 deactivates the input lock.
5. Click on Save
Related topic:
 Operating the KVM extender exclusively on page 18
(default) to open the on-screen display.
System setup and press
Hotkey and press Enter
enter the desired timespan of the input lock
KVM extender .
.
General and then on the tab
.
.
.
0
Enter .
.
CPU .
G&D DP1.2-VisionXG-Fiber · 32
Configuration