G&D DP1.2-VisionXG-Fiber Installation Und Bedienung Seite 87

Connecting keyboard and mouse to the local computer
Network B
USB 2.0 CPU Network A USB K/M
USB CPU: Use the USB-AM/BM-2 cable to connect one of the computer's USB inter-
faces to this interface.
NOTE:
The USB CPU
boards and mice to the computer.
PS/2 CPU: Use a PS/2 cable (optionally available) to connect the computer's PS/2
keyboard interface to this interface.
NOTE: The PS/2 CPU
keyboards to the computer. Usually, a connection to this interface is not required.
Connecting the monitor to the local console
A
Transmission
DP Out: Connect the local console monitor here.
NOTE: Each video channel of the MultiChannel variant is provided with one
interface. The numbers behind the interface names assign each interface to a given
channel.
RS232
Line
PS/2 In Out USB CPU USB CPU
interface is used to transmit the data of USB and PS/2 key-
interface is used to transmit only the signals of USB and PS/2
B
DP Out DP CPU
Main Power
Power
Red.
Main
PS/2 CPU PS/2 CPU Ready Ident.
System Fail
Network B
Host
Link
USB 2.0 CPU Network A
G&D DP1.2-VisionXG-Fiber · 8
Installation
Red. Power
RS232
USB K/M PS/2
DP Out