Changing The Video Mode Of Consoles - G&D DP1.2-VisionXG-Fiber Installation Und Bedienung

1. In the menu, click on
2. Click on the KVM extender you want to configure and then click
on Configuration
3. Click on the tab
4. Click on the tab
station (on the
Click on the tab
station (on the
5. In the field Permanent access mode
 right for exclusive access is granted (default)
Enabled
Disabled  right for exclusive access is denied
6. Click on Save
Related topics:
 Operating the KVM extender exclusively on page 18
 Changing the video mode of consoles on page 34

Changing the video mode of consoles

In the standard configuration of the KVM extender, the computer's image is output at
the monitor of the active console as well as at the monitor of the concurrent console.
You can also define that the image of the other console is deactivated during con-
sole inputs.
The image of the other monitor is shown again as soon as the user has finished their
inputs at the console.
.
KVM extender
.
.
General
if you want to configure the access to the local work-
CPU
CPU module).
if you want to configure the access to the remote work-
CON
CON module).
, select one of the following options:
.
Configuration
G&D DP1.2-VisionXG-Fiber · 34