Automatic Closing Of The Osd After Inactivity - G&D DP1.2-VisionXG-Fiber Installation Und Bedienung

Configuration

Automatic closing of the OSD after inactivity

If desired, you can set the OSD to close automatically after a period of inactivity.
The period of inactivity can be defined by entering a value between
NOTE:
To disable the function, enter the value
How to change the period of inactivity after which the OSD closes:
1. Press Ctrl+Num
2. Select the row
3. Select the row
4. Under
Close OSD when inactive for [s]
between
5
5. Press to save your settings.
F2
1. In the menu, click on
2. Click on the user account you want to configure and then click
on
Configuration
3. Click on the tab
4. Under Timeout OSD session
5. Click on Save
55 · G&D DP1.2-VisionXG-Fiber
(default) to open the on-screen display.
and press
Console setup
Personal Profile
and seconds and press
99
.
Users
.
KVM extender systems
, enter a time span between
.
0 .
.
Enter
and press .
Enter
you can define a time span
.
Enter
.
5 and 99 seconds.
5 and 99 seconds.