Switching Power Outlets - G&D DP1.2-VisionXG-Fiber Installation Und Bedienung

Operation
Immediately after pressing this hotkey, the input devices of the concurrent console
are deactivated. By pressing the hotkey again at the active console, users at both
consoles are again able to operate the KVM extender.
NOTE: After the exclusive operation of the KVM extender has been activated at
one console, the Caps Lock, Num as well as the Scroll Lock LEDs are blinking alter-
nately at the keyboard of the locked console.
The blinking Scroll Lock LED at the active console indicates the exclusive opera-
tion of the KVM extender.
ADVICE:
In the standard configuration of the KVM extender, the computer's
video signal is output at the active as well as the concurrent console monitor.
If necessary, change the video modes of the user modules (see page 34) to switch
off the image of the concurrent console while you operate the extender at the
other console.
 Right for exclusive access to the console on page 33
 Changing the video mode of consoles on page 34
 Changing the exclusive key on page 31

Switching power outlets

A compatible power switch (
power supply of devices by using the KVM extender.
IMPORTANT:
The configuration of power switches and the assignment of power
outlets is carried out in the web application
How to switch the power outlets assigned to the KVM extender:
1. Use the hotkey
2. Use the arrow keys
NOTE:
If the computer module is not assigned with at least one power outlet,
this entry cannot be selected and the text
3. Press Enter to carry out one of the following options:
turn off  turn power outlet(s) off
 turn power outlet(s) on
turn on
19 · G&D DP1.2-VisionXG-Fiber
ePowerSwitch 1G
Ctrl+Num (default) to open the on-screen display.
to select the row
, 4M+ and
Config Panel .
Target Power .
n.c. (not connected) is shown instead.
8M+ ) lets you switch the