Information Display - G&D DP1.2-VisionXG-Fiber Installation Und Bedienung

Configuration

Information display

Information displays are shown temporarily (5 seconds) in the upper left corner.
ADVICE:
If the temporary information display is active, you can press the hotkey
Ctrl+Caps Lock to repeat the caption.
The information display can also be shown permanently or it can be disabled
How to change the setting of the information display:
1. Press Ctrl+Num
2. Select the row
3. Select the row
4. Under
Display
Off
Temporary
Permanent
5. Press to save your settings.
F2
1. In the menu, click on
2. Click on the user account you want to configure and then click
on
Configuration
3. Click on the tab
4. In the
Show OSD info
Off
Temp
Perm
5. Click on Save
53 · G&D DP1.2-VisionXG-Fiber
(default) to open the on-screen display.
Console setup and press
Personal Profile
press to select between the following options:
F8
 information display is turned off
 information display is shown temporarily for 5 seconds (default)
 permanent information display
.
Users
.
KVM extender systems
field, select between the following options:
 information display is turned off
 information display is shown temporarily for 5 seconds (default)
 permanent information display
.
Enter .
and press Enter .
.