Enabling Or Disabling Ddc/Ci Support - G&D DP1.2-VisionXG-Fiber Installation Und Bedienung

Enabling or disabling DDC/CI support

The KVM extender is ready to support monitors with
function has been activated, the
monitor in order to support as many monitors as possible.
NOTE: However, we cannot guarantee the support for all monitors.
How to configure the DDC/CI support:
1. Press
Ctrl+Num
2. Select the row
3. Under DDC/CI support
disabled
CPU > Monitor
bidirectional
4. Press to save your settings.
F2
1. In the menu, click on
2. Click on the KVM extender you want to configure and then click
on
Configuration
3. Click on the tab
4. When using a multi-channel device, click on the desired video channel and
then click on
5. Select one of the options given under
Disabled
CPU > monitor
Bidirectional
6. Click on Save
DDC/CI information is transparently forwarded to the
(default) to open the on-screen display.
Console setup and press
press F8 to select on of the following options:
 The DDC/CI transmission is disabled (default).
 The DDC/CI transmission is carried out exclusively
from the target to the monitor.
 The DDC/CI transmission is carried out bidirectionally.
KVM extender .
.
Video channels .
.
Configuration
 The transmission of DDC/CI signals is disabled (default).
 The transmission of DDC/CI signals is carried out
exclusively from the CPU to the monitor
 The transmission of DDC/CI signals is carried out by
bidirectionally.
.
functionality. After the
DDC/CI
Enter .
DDC/CI monitor :
G&D DP1.2-VisionXG-Fiber · 40
Configuration