G&D DP1.2-VisionXG-Fiber Installation Und Bedienung Seite 114

Configuration
How to select the video mode of a console:
1. Press Ctrl+Num
2. Select the row
mode for the remote console (at the
Select the row
video mode for the local console (at the
3. Under Video mode
always on
switch off
4. Press F2 to save your settings.
1. In the menu, click on
2. Click on the KVM extender you want to configure and then click
on Configuration
3. Click on the tab
4. Click on the tab
the local workstation (on the
Click on the tab
the remote workstation (on the
5. In the field
 (default)
always on

off for actions at remote/local console
6. Click on
Save
Related topics:
 Changing the time span of the input lock on page 32
 Right for exclusive access to the console on page 33
35 · G&D DP1.2-VisionXG-Fiber
(default) to open the on-screen display.
Console setup and press
Local console setup
press F8 to select one of the following options:
 image is always on (default)
 switch off image for actions at the other console
KVM extender
.
.
General
if you want to configure the video operating mode of
CPU
if you want to configure the video operating mode of
CON
, select one of the following options:
Image display
.
Enter if you want to adjust the video
CON module).
and press Enter
CPU module).
.
module).
CPU
module).
CON
if you want to adjust the