G&D DP1.2-VisionXG-Fiber Installation Und Bedienung Seite 118

Configuration
How to configure the Freeze mode:
1. Press Ctrl+Num
2. Select the row
The Freeze mode is adjusted separately for each video channel of the user module. The
following options can be adjusted separately for each video channel of multi-channel
devices.
3. Under Freeze mode
off
with buffer
without buffer
4. If the Freeze mode is active, press
under Freeze visualization
frame
OSD
frame+OSD
5. Press F2 to save your settings.
1. In the menu, click on
2. Click on the KVM extender you want to configure and then click on
Configuration
3. Click on the tab
4. When using a multi-channel device, click on the desired video channel and
then click on
5. In the
Freeze mode
Off
On | OSD timer + frame
On | Frame
On | OSD
6. If the Freeze mode is active, you can use the
switch the buffer on (
7. Click on Save
39 · G&D DP1.2-VisionXG-Fiber
(default) to open the on-screen display.
Console setup and press
press F8 to select on of the following options:
 Freeze mode is disabled (default)
 Freeze mode is active (with buffer)
 Freeze mode is active (without buffer)
:
 shows a coloured frame when disconnected
 shows Frozen and the time passed since disconnection
 shows a coloured frame (
KVM extender
.
Video channels
Configuration .
field, select one of the following options:
 Show no image if the connection is lost (default).
 Display of a coloured frame in case of a
disconnection as well as display of the warning
Frozen and the time elapsed since the
disconnection.
 A disconnection is indicated by a coloured frame.
 Display of the warning Frozen and the time elapsed
since the disconnection.
With buffer
.
Enter .
F8 to select one of the options available
frame ) and Frozen (
.
.
Freeze mode buffer
) or off ( Without buffer
OSD )
field to
).