Selecting A »Generic Hid« Device - G&D DP1.2-VisionXG-Fiber Installation Und Bedienung

Configuration
How to select a USB-HID mode:
1. Press Ctrl+Num
2. Select the row
3. Select the row
4. Press F2 to save your settings.
1. In the menu, click on
2. Click on the KVM extender you want to configure and then click
on
Configuration
3. Click on the tab
4. Select the desired option (see above) under
5. Click on
Save
Selecting a »Generic HID« device
After activating the USB HID mode
device connected to the upper Keyb./Mouse socket of the user module is transferred
unchanged to the computer module.
IMPORTANT: The
possible to guarantee the operation of a particular HID device in Generic HID
mode.
When connecting a USB hub or USB device equipped with multiple USB devices,
you can use only the first of the connected HID devices in Generic HID mode.
Use the OSD if you want to select another connected HID device.
43 · G&D DP1.2-VisionXG-Fiber
(default) to open the on-screen display.
Target setup and press
USB HID mode and press
KVM extender
.
and then on the tab
General
.
supports many HID devices. However, it is not
Generic HID mode
Enter .
F8 key to select an option (see above).
.
.
CPU
USB HID mode
(see above), data from the USB
Generic HID
.